OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0531

Invalid Data Received From Rear Gate Module

The rear gate module runs a powered liftgate or tailgate: motor drive, latch, pinch sensing and the requests from switches or key fob. U0531 is stored when its messages reach other controllers with content they refuse. No manufacturer documents U0531 itself, but its lost-communication partner U0230 appears in several bulletins. GM's Saab 9-5 code list calls the unit liftgate control module; GM PIT5422 traced U0230 on 2010–2015 Equinox and Terrain to water or corrosion in connector X901 in the upper liftgate area on the low-speed LAN; Toyota T-SB-0038-15 lists U0230 with B2222 on 2008–2013 Highlander whose power back door reversed instead of latching. FCA's WL Grand Cherokee shows signal-invalid codes inside the liftgate module. Driving is unaffected.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 31

Possible causes

  • Water ingress or corrosion in connectors at the liftgate high
  • Liftgate module software fault (update available on some models) medium
  • Broken wires in the harness passing through the liftgate hinge area medium
  • Hinge or drive damage after repeated obstruction while closing low

Symptoms

  • Power liftgate does not open or close electrically
  • Liftgate reverses at the fully closed position
  • Interior lamps or other body functions fail at the same time (shared LAN)

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0531

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication