OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0530

Invalid Data Received From Object Detection Maintenance Control Module B

Module B of this family is a second maintenance controller for object detection sensors, for instance one serving another sensor group or the other side of the vehicle. The generic definition offers no public explanation, and no manufacturer document names U0530. Denso's patent US11451765 illustrates the kind of decision such a unit supports: two sensors sharing a field of view are compared, and when they disagree about the objects they see, one of them is judged dirty and marked for cleaning. U0530 is stored when a receiving module gets frames from module B that fail checks such as range, counter or checksum. The outcome is usually a message that a sensor or assistance feature is unavailable, not any effect on drivability. Total loss of B is U022F; the A unit is U052F.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 30

Possible causes

  • Software level of module B not matching the receiving controller medium
  • Module B internal fault, e.g. after water or road salt exposure medium
  • Intermittent contact in the data line or connector to module B low

Symptoms

  • Message that a sensor or assistance function is unavailable
  • Automatic sensor cleaning on one side or sensor group not working

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0530

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication