OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U052F

Invalid Data Received From Object Detection Maintenance Control Module A

Object detection maintenance control modules appear in the generic code list, but no manufacturer has published what they do or when this fault sets. The name points to a unit that keeps cameras, radar or lidar used for object detection usable, for example by running washers, air jets or heaters. Ford's patent US10569746 describes such logic for a roof-mounted lidar: a contactless cleaner runs first, and a wiping cleaner follows only if the window is still too opaque. U052F means a receiver, most likely the driver-assist controller, gets messages from maintenance module A that are corrupt or implausible, so it cannot rely on the reported cleaning or blockage status. Assistance features may report a blocked sensor or switch off. Loss of the module is U022E; module B is U0530.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 2F

Possible causes

  • Software or configuration mismatch of maintenance module A medium
  • Internal fault of the maintenance module (e.g. moisture ingress) medium
  • Wiring or connector fault on the module's data line low

Symptoms

  • Sensor blocked or sensor cleaning message
  • Driver assistance features temporarily unavailable
  • Sensor washing or heating not working

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U052F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication