OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U052A

Invalid Data Received From Heated Steering Wheel Module

The heated steering wheel module powers the heating mat in the rim and reports its state, such as heater on or off, the requested level and the rim temperature read by an embedded thermistor, to the body or climate network. A receiver that gets these frames but finds the content implausible (temperature out of range, bad checksum or counter, wrong length) logs U052A; if the frames stop entirely, U0229 is set instead. Ford shows that the hardware depends on the option: if adaptive steering is fitted, heating is a job of Ford's SECM, the steering effort controller inside the wheel, otherwise of a separate HSWM (SSM 47850). No bulletin names U052A itself. For the driver the rim may stay cold, switch off early or show no status; steering is unaffected.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 2A

Possible causes

  • Rim temperature sensor drifting or open, giving implausible values medium
  • Worn clock spring or steering wheel wiring to the heater circuit medium
  • Heated steering wheel module internally faulty medium
  • Module software or configuration not matching after programming low

Symptoms

  • Heated steering wheel stays cold or switches off early
  • Heater indicator or menu shows no or wrong status

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U052A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication