U0529
Invalid Data Received From Door Window Motor G
With G, J2012 reaches the seventh and last window motor slot, more than most vehicles will ever use. No manufacturer publishes U0529 or names a window for G. Should the code appear, it follows the logic of its siblings: motor G is heard on the network, yet its frames are rejected because of a checksum or counter error, a signal marked invalid or a value outside the agreed range. Supply problems are a frequent trigger, since lift motors draw high starting currents; NXP's MM908E624 design reports overvoltage and overtemperature in its status for that reason. For diagnosis, watch the reported position while operating the window and check supply and ground before replacing the motor. U0228 means the motor is silent.
Possible causes
- Weak supply or ground causing faults under starting current medium
- Window motor G or its electronics faulty medium
- Motor electronics overheated after repeated operation low
Symptoms
- Window stops responding after several operations
- Automatic functions of that window disabled
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0529
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.