OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0528

Invalid Data Received From Door Window Motor F

Window motor F is one of the slots beyond the four usual side doors; it could serve, for instance, powered rear quarter glass or a sliding door window, but no manufacturer documents which window F stands for or publishes U0528. Such motors report through status signals: in NXP's LIN 2.0 window lift example (AN2960) the slave returns an error flag for its last action plus a LIN response-error bit, which lets the master keep watch over every node. When these signals arrive in an inconsistent form, for example after a motor with a different variant or node configuration has been fitted, the master discards them and stores U0528. The window concerned then moves only in a limited way or not at all, while the others remain usable. U0227 is the lost-communication partner.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 28

Possible causes

  • Replacement motor with a different variant or node configuration medium
  • Window motor F internally faulty medium
  • Damaged wiring at a sliding door or rear body transition low

Symptoms

  • An additional power window moves only partly or not at all
  • Code appears after a motor has been replaced

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0528

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication