U0526
Invalid Data Received From Door Window Motor D
Not every lift motor carries Hall sensors. Patent US11611297 describes a cheaper approach in which the controller derives speed, current and how quickly current changes from the ripple that commutation leaves in the motor current, and recognises a pinch from those values. Positions obtained this way are sensitive to supply noise and brush wear, so the data reported by window motor D may drift out of the plausible range and lead to U0526. No manufacturer publishes this code or says which door uses letter D. Practical effects resemble the sister codes: express and comfort closing disabled, a lost end position, sometimes a window that halts part way. U0225 is stored instead when motor D does not answer at all.
Possible causes
- Position counting from current ripple disturbed (brush wear, supply noise) medium
- Window motor D or its electronics faulty medium
- Poor ground or connector at the door low
Symptoms
- Window halts part way or misjudges its end position
- Express and comfort closing unavailable
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0526
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.