U0523
Invalid Data Received From Door Window Motor A
A door window motor in the J2012 sense is a lift motor with its own electronics that talks to the network, usually as a LIN slave of a door or body controller. Such a unit reports where the glass is, based on its Hall pulses, whether it stopped for an obstacle or a stall and whether its sensor or supply has failed, as NXP's MM908E624 reference design (AN3147) shows. U0523 is stored when these reports from motor A reach the master but cannot be used. No manufacturer documents the code or the door behind letter A. Typical consequences are a window that only moves while the switch is held, a missing express function or no automatic closing on locking. Lost communication with the same motor is U0222.
Possible causes
- Electronics or Hall sensor in window motor A faulty medium
- Window position not learned after battery disconnection or repair medium
- Damaged LIN, supply or ground wire to the motor low
Symptoms
- Window moves only while the switch is held
- Express up/down or comfort closing unavailable
- Window stops part way
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0523
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.