U0522
Invalid Data Received From Door Switch G
J2012 provides seven door switch units, and G is the last of them. Few vehicles need that many networked switch packs, and no manufacturer publishes what G stands for or documents U0522. Where such a unit exists it works like its siblings: it supplies its button states when asked, and the receiver ignores them once a frame is malformed, out of range or carries an invalid counter. After a switch pack has been replaced or the body controller reconfigured, a variant or software level that does not suit the vehicle can produce exactly this pattern; FCA's Cherokee bulletin 08-013-15 shows door-switch codes being cleared by BCM software and a restored configuration. All other doors and switches carry on working. U0221 is the partner for complete silence.
Possible causes
- Switch variant or body controller configuration not matching medium
- Switch unit G internally faulty medium
- Data or supply wire to switch unit G damaged low
Symptoms
- One additional switch panel ignored by the vehicle
- Code appears after a switch or module replacement
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0522
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.