U051A
Invalid Data Received From Door Switch E
U051A concerns door switch unit E. On a car with four side doors, A to D would already be enough for one unit per door, so E suggests an additional switch location; no manufacturer documents this code or says what E means. Rear or sliding doors with their own electronics are plausible candidates: Yazaki's patent US8304928 describes doors with dedicated controllers, each serving a window switch module, joined to the body network through a LIN sub-bus. One interaction matters for any rear switch: the driver's window lockout blocks rear requests deliberately, so a rear switch that does nothing is not by itself a fault. The code becomes meaningful when frames from unit E contain implausible values; U0219 indicates the unit has gone silent.
Possible causes
- Switch unit E internally faulty or water-damaged medium
- Fault on the LIN sub-bus wiring between door controller and switch medium
- Switch variant not matching the vehicle configuration low
Symptoms
- Switch at an additional door position without function
- Window at that position operable only from the driver's door
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U051A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.