U0519
Invalid Data Received From Door Switch D
Door switch unit D reports the positions of its buttons as coded data. Inside such packs several contacts often share one input through resistor networks or comparators, as Microchip explains for the switch interface of its LIN chips ATA6641/ATA6642, and the stages of a window rocker are distinguished by voltage level. Worn or wet contacts can then yield combinations the receiver regards as impossible, such as up and down at the same time, and the frame is thrown away. No manufacturer assigns D to a particular door or documents U0519; GM's Saab 9-5 code list, for example, handles the rear door switch panels under separate codes, U0203 and U0204. A sticky or water-damaged switch pack is the most likely cause; U0218 covers complete loss of the unit.
Possible causes
- Worn, sticky or wet contacts producing impossible switch combinations high
- Electronics of switch unit D faulty medium
- Poor ground or damaged data wire to the switch low
Symptoms
- Window moves the wrong way or not at all from this switch
- Express function triggered or missing unexpectedly
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for U0519
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.