U0517
Invalid Data Received From Door Switch B
Door switch B is the only letter of this series with a published manufacturer assignment. FCA bulletin 08-013-15 for the 2014 Jeep Cherokee (KL) gives the partner code U0216 as lost communication with the driver door switch; it showed up after the battery had been disconnected, together with a Start/Stop Not Available message, and was cured with new BCM software and a restored proxi configuration. U0517 itself is not documented by any manufacturer: here the driver's switch pack keeps sending, but the content is rejected. Since this pack usually holds the master buttons for every window, the rear window lockout and often lock and mirror controls, corrupt data can disable several functions at once. Battery voltage, BCM software and the driver door harness are the first checks.
Possible causes
- BCM software or vehicle configuration out of step after battery disconnection (FCA KL) medium
- Driver door switch pack faulty, e.g. after liquid ingress medium
- Chafed data or ground wire between body and driver door low
Symptoms
- Driver's master window switches or window lockout not working
- Lock or mirror adjustment from the driver's door unavailable
- Start/Stop Not Available message (FCA, with partner code)
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U0517
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.