U0516
Invalid Data Received From Door Switch A
Here a door switch is a networked switch pack in a door trim panel that reports window, lock or mirror requests as data instead of through separate wires. U0516 is stored when frames from switch unit A arrive but fail the receiver's validity checks. No manufacturer publishes which door letter A stands for or documents this code; FCA lists the driver's switch as unit B, so A cannot simply be taken as the driver's side. NXP's car door keypad note AN2205 illustrates the scheme: the body controller polls the keypad over LIN about every 100 ms and receives a short status reply in which the slave also flags its own bus errors. Requests from a rejected switch are ignored or treated as released, so its buttons seem dead. U0215 is the lost-communication counterpart.
Possible causes
- Electronics of switch unit A faulty (moisture, cracked solder joints) medium
- Damaged data or ground wire in the door harness medium
- Replacement switch of the wrong variant or software level low
Symptoms
- Buttons on one door switch pack without function
- Window or lock on that door only operable from other switches
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U0516
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.