OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0514

Invalid Data Received From Mirror Control Module A

J2012 provides two mirror control units, and U0514 concerns unit A: its frames keep arriving, but the receiver finds the content unusable, for instance a signal flagged invalid, a wrong counter or checksum, or a value outside the defined range. FCA ties the letter to the cabin mirror. In its Grand Cherokee case S2108000013 the partner code U0213 is called interior mirror control module A and was logged in the BCM after a configuration restore had wrongly declared a combined rear view mirror module fitted. Jaguar Land Rover shows the invalid-data side with its own code B1974-86 on the 2020 Evoque, caused by mirror software and without any effect on function. Depending on the unit, auto-dimming, a camera mirror view or memory settings may be unavailable. U0213 means silence; module B uses U044F.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 14

Possible causes

  • Software error in the mirror module sending invalid signal values high
  • Vehicle configuration in the BCM not matching the fitted mirror variant medium
  • Mirror control module A internally faulty medium
  • Loose or corroded connector at the mirror (headliner or door) low

Symptoms

  • Often no noticeable effect; code found only during a scan
  • Auto-dimming or camera mirror view unavailable
  • Mirror memory or folding function not working

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0514

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication