U050C
Invalid Data Received From Door Control Module H
Door control module H, the last door slot, is used by Ford in two different ways. In the Mach-E, Aviator and Nautilus it is the fourth electronic latch module, DCMH, updated together with DCME–DCMG. In the 2020–2022 Transit it controls the power sliding door: TSB 22-2305 describes a sliding door that partly moves or fails to open or close, with U201A possibly stored in DCMH, fixed by a new latch, conical washers and door adjustment. So on a van, U050C most likely concerns the sliding door, on a passenger car a latch. The code is set when a receiver rejects DCMH's frames as invalid; U020B stands for lost contact. No bulletin shows U050C itself.
Possible causes
- Power sliding door latch or adjustment fault feeding wrong states (Ford Transit) medium
- Latch module software (Ford DCMH) medium
- Worn wiring in the sliding door track or hinge medium
Symptoms
- Power sliding door moving only partly or not at all
- Door ajar or door fault message
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U050C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.