U050B
Invalid Data Received From Moveable Roof Control Module B
A second moveable roof module only makes sense where the roof has more than one powered element, for instance a sliding front glass panel plus a separately driven rear panel or sunshade, or a large panoramic roof split into sections. U050B records that data from this second unit reached the network but was unusable. GM's Saab 9-5 code list knows only one moveable roof module (U0207), and no manufacturer publishes a case for the B module, so the code is uncommon. Its lost-communication partner is U020A. Because each panel keeps its own end positions and pinch protection, faulty data from B usually affects only that panel: it may stay closed, stop part-way or need re-initialising.
Possible causes
- Second roof drive lost its end-position learning medium
- Moveable roof control module B faulty, often after water entry medium
- Connector or lead to the rear roof drive damaged low
Symptoms
- Rear roof panel or shade not moving while the front one works
- Panel stopping part-way
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U050B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.