OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U04BF

Invalid Data Received From Drive Motor A Clutch Actuator

Some electric and hybrid drivetrains can separate a drive motor from its wheels with a clutch so that an unused axle does not drag the motor along. A Rivian patent describes such a disconnect without a position sensor: the motor speed is brought within a small window of the output speed before engaging, and the control system judges success from how the motor responds to the load. U04BF is set when the actuator for drive motor A sends messages that the receiving controller finds implausible, for example a clutch state that contradicts the speeds. No manufacturer documents this code publicly. On hybrids CARB 1968.2 calls for monitoring of drive motor performance. U01BE marks a silent actuator. Expect reduced power, all-wheel drive or the second motor locked out, and a drive system warning.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / BF

Possible causes

  • Clutch actuator motor or its electronics faulty medium
  • Worn or sticking disconnect clutch giving a state that does not match the command medium
  • Bus wiring or connector at the drive unit damaged medium
  • Software of actuator and drive controller not matching low

Symptoms

  • Drive system or all-wheel-drive warning
  • Reduced power or one motor not used
  • Clunk or jerk when the motor is coupled

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U04BF

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication