U04BE
Invalid Data Received From Battery Charger Control Module B
U04BE is logged when a module receives data from battery charger control module B that it cannot accept. Charging hardware can come in more than one stage: the Audi e-tron, for example, was sold in Europe with 11 kW AC charging as standard and 22 kW as an option. Which unit counts as A or B is up to the maker. Polestar shows one assignment: on the Polestar 3 the control unit GCCC stores U01BB00, the lost-contact sibling for charger B, when the on-board AC charger GHCA has failed; AC charging then stops while DC charging still works, and the fix is a new GHCA. No maker documents U04BE itself. It is not emission-related; expect slow or no AC charging.
Possible causes
- On-board charger B internally faulty (Polestar 3 analogy, grid disturbances) high
- Charger or charging-control software out of date medium
- Bus wiring or plug at the charger damaged low
Symptoms
- AC charging slow, interrupted or impossible
- DC fast charging usually still works
- Charging fault message
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U04BE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.