U04B5
Invalid Data Received From Brake System Control Module B
Brake system control module B is a second brake controller. Bosch, for instance, adds a second, redundant brake unit to its Integrated Power Brake on automated vehicles so the car can still be stopped if the main unit fails, and the iBooster plus ESP pairing serves the same purpose. U04B5 is stored when a receiver gets messages from module B that fail plausibility, for example a wrong counter, checksum or pressure value. U0418 is the matching code for the primary brake module, U01B4 marks lost contact with module B and U031C a software mismatch. No manufacturer documents U04B5 publicly. As a safety system it rarely lights the MIL; expect brake or stability warnings, and driver assistance or automated functions may be switched off.
Possible causes
- Brake control module B internally faulty medium
- Chassis or private brake bus wiring or connector fault medium
- Software of the two brake modules not matching after update or replacement medium
- Weak supply on the redundant power path low
Symptoms
- Brake, ABS or stability control warning
- Driver assistance or automated driving functions unavailable
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U04B5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.