OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U04B3

Invalid Data Received From Planetary Gear Set Control Module

Several hybrid transmissions use planetary gear sets whose shift elements are switched to change the operating mode; two-mode hybrids, for example, combine two extra planetary sets with four clutches to move between electric, power-split and fixed-gear driving. Where a separate module controls such a set and reports its state, U04B3 marks messages from that module that arrive but carry implausible data. No manufacturer documents this code publicly, and SAE gives little more than the name. CARB 1968.2 counts transmission controllers among the emission-critical powertrain units and requires hybrid components to be monitored. U01B2 covers a module that no longer talks. Depending on design, the hybrid system may fall back to a limited mode with a warning light.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / B3

Possible causes

  • Planetary gear set control module or its position sensing faulty medium
  • Bus wiring or connector at the transmission damaged or oil-soaked medium
  • Software of module and hybrid controller not matching low

Symptoms

  • Hybrid system or transmission warning
  • Reduced power or electric-only driving unavailable

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U04B3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication