OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U04B2

Invalid Data Received From Particulate Matter Sensor B

U04B2 is the B counterpart of U04A4, intended for vehicles that carry a second smart PM sensor, for instance one per exhaust line or one ahead of and one behind a filter. Messages from sensor B still reach the engine controller, but their content is rejected. No manufacturer documents this code publicly; the public examples all use the single sensor A. By analogy with GM's handling of sensor A in 25OBDG04A, a receiver would count frames with a wrong rolling counter, protection value or checksum and set the code once too many fail within a short window. CARB 1968.2 demands that OBD detect PM sensor faults before the sensor can no longer serve filter monitoring. U01B1 means sensor B has gone silent. Expect a MIL and an incomplete filter check, with no change in drivability.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / B2

Possible causes

  • Control unit or element of PM sensor B damaged by heat, soot or moisture high
  • Wiring or connector of sensor B chafed or corroded medium
  • Sensors A and B swapped or wrong variant fitted low

Symptoms

  • Check engine light on
  • Particulate filter readiness not set

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U04B2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication