U04B0
Invalid Data Received From Hybrid/EV Battery Interface Control Module P
U04B0 closes the series: interface module P is the sixteenth and last letter the code lists provide for these boards, with U01AF for lost contact and U0349 for a software mismatch. Packs with more than sixteen monitored sections do exist, such as Ultium batteries with up to 24 modules, so either several modules share one board or the maker uses its own codes beyond P; which applies is not published. The next code, U04B1, already belongs to a different device, the battery monitor module. As with the other letters, U04B0 means the battery controller receives P's messages but finds their content unusable, which leads to power limits and a warning. No manufacturer documents U04B0 publicly.
Possible causes
- Interface control module P faulty medium
- Contact fault on the internal link to module P medium
- Battery controller software misreading module P low
Symptoms
- High-voltage system warning
- Power and charging limited
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U04B0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.