U04AE
Invalid Data Received From Hybrid/EV Battery Interface Control Module N
U04AE stands for invalid data from interface module N, the fourteenth. Like the other high letters it can only appear on a large pack, and no manufacturer documents it publicly. What changes for the workshop is mostly practical: the board sits inside the sealed high-voltage battery, so after reading the freeze-frame data and ruling out the 12 V supply and the low-voltage connectors outside the pack, every further step means de-energising the system, measuring isolation and opening the housing, a job for trained staff with the maker's tester. Polestar, for example, bills a high-voltage battery disconnect with insulation measurement as a labour step of its own when a high-voltage part is replaced. U01AD means module N is silent, U0347 a software conflict.
Possible causes
- 12 V supply or low-voltage plug of the pack at fault (check first) medium
- Interface control module N faulty medium
- Contact fault on the internal link to module N medium
Symptoms
- Battery or EV system warning
- Output and charging power limited
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U04AE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.