OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U04AD

Invalid Data Received From Hybrid/EV Battery Interface Control Module M

With U04AD the series reaches module M, the thirteenth interface board, which only exists in packs larger than the common twelve-module layout. One example of such a size is GM's Hummer EV: Wikipedia describes its Ultium battery as 24 modules in two layers that can be switched from parallel to series for 800 V fast charging. How GM names the monitoring electronics in that pack is not published, and no maker documents U04AD. The code says the battery controller receives M's frames but rejects their content; corrupted counters, checksums or impossible cell values are typical reasons in this code family. Loss of contact would be U01AC, a software mismatch U0346. Reduced power or charging is the likely consequence.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / AD

Possible causes

  • Corrupted frames on the internal link (counter or checksum errors) medium
  • Interface control module M faulty medium
  • Measurement input on board M reporting impossible values low

Symptoms

  • Battery system warning
  • Fast charging slower or refused

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U04AD

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication