U04AB
Invalid Data Received From Hybrid/EV Battery Interface Control Module K
U04AB means interface module K, the eleventh, delivers data the battery controller judges invalid. What those boards report, cell voltages and temperatures, are exactly the inputs that CARB rule 1968.2, paragraph (e)(15.2.3)(A)(iv), names for monitoring in a hybrid energy storage system; this is why plug-in hybrids light the MIL for such faults, while battery-electric cars, which fall outside these rules, show a battery or system warning instead. With part of the pack unreadable, the controller has to assume the worst for those cells: tighter charge and discharge limits or a blocked charge. No manufacturer documents U04AB publicly, and an eleventh board only exists in larger packs. U01AA covers loss of contact, U0344 a software mismatch.
Possible causes
- Faulty temperature or voltage input on board K medium
- Contact fault on the internal data link to module K medium
- Interface control module K internally faulty low
Symptoms
- MIL (plug-in hybrid) or battery warning (EV)
- Charging blocked or slowed
- Reduced acceleration
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U04AB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.