OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U04A9

Invalid Data Received From Hybrid/EV Battery Interface Control Module I

U04A9 refers to interface module I, the ninth position in the series. It is the third of the codes Volkswagen lists for the ID.4: in the dealer analysis list of July 2024, U04A9 appears beside U04A1 and U04A5 as a CMCe fault in address 8C, valid for model years 2021 to 2024, with an electrical system message as the complaint. According to Wikipedia the smaller ID.4 battery has nine modules and the larger one twelve, so a ninth position exists in both, though VW does not say how letters map to modules. As with the other two, the helpline must be called before parts are changed. U01A8 marks loss of contact with I, U0342 a software conflict. From J (U04AA) on, the series presupposes larger packs.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / A9

Possible causes

  • Software issue in the battery electronics (VW ID.4 case) high
  • Interface control module I internally faulty medium
  • Contact fault on the pack-internal link to module I low

Symptoms

  • Electrical system warning message
  • Charging or power restricted

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U04A9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication