OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U04A8

Invalid Data Received From Hybrid/EV Battery Interface Control Module H

U04A8 is the invalid-data code for interface module H. In GM's 2016 hybrid table 16OBDG02, H is the last of eight boards that the battery systems module reaches through a daisy chain; a pack of that design needs no higher letter. GM explains that a break anywhere in such a chain cuts off every board behind it, so lost contact is reported for the first board that cannot be recovered. An invalid-data code is different: if only H's frames fail the checks while A to G pass, the cause is more likely local to H, its connector or its cell inputs. No manufacturer documents U04A8 publicly. U01A7 means H is silent, U0341 a software mismatch. The driver sees a hybrid warning and may lose power.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / A8

Possible causes

  • Interface control module H internally faulty medium
  • Connector or lead fault at the last board of the chain medium
  • Faulty cell input on board H producing impossible values low

Symptoms

  • Hybrid system warning, MIL on plug-in hybrids
  • Reduced propulsion power

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U04A8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication