U04A7
Invalid Data Received From Hybrid/EV Battery Interface Control Module G
U04A7 points to interface module G. In a modular battery management system each board sits at a different potential: the ground of the top module can be hundreds of volts above that of the bottom one, so the boards talk through isolated links such as optocouplers or radio. Interference, moisture in a connector or an ageing isolator can corrupt the frames of a single board without breaking the link altogether, and the battery controller then logs an invalid-data code for that letter. No manufacturer publishes U04A7 or thresholds for it. In GM's table 16OBDG02, G is the seventh of eight boards. U01A6 stands for lost contact with G, U0340 for a software mismatch. Charging or drive power may be limited.
Possible causes
- Moisture or corrosion at internal connectors (leaking pack seal) medium
- Failing isolated communication stage on board G medium
- Interface control module G otherwise defective low
Symptoms
- Battery or hybrid system warning
- Charging or drive power limited
- Fault may come and go with humidity or temperature
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U04A7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.