OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U04A2

Invalid Data Received From Hybrid/EV Battery Interface Control Module B

U04A2 covers the second interface board of the high-voltage pack, module B: its frames reach the battery controller but carry implausible content. No manufacturer documents this exact code publicly. The closest published logic is GM's 2016 hybrid table 16OBDG02, where the battery systems module talks to eight interface boards, A to H, over a serial UART daisy chain. If no data at all arrive from B for 5 s at more than 10.2 V, GM logs the lost-link sibling U01A1 as Type A, after first trying a loop-back test that bypasses the chain. U04A2 is the opposite case: the link exists, the content fails. CARB lists battery voltage sensors among the hybrid storage inputs that OBD has to check. Software issues fall under U033B.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / A2

Possible causes

  • Poor contact in the chain connection between interface boards A, B and C medium
  • Interface control module B internally faulty medium
  • Outdated calibration in the battery controller medium

Symptoms

  • Hybrid or EV system warning, MIL on plug-in hybrids
  • Electric range or power reduced

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U04A2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication