OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U04A1

Invalid Data Received From Hybrid/EV Battery Interface Control Module A

U04A1 means the battery management controller keeps receiving messages from interface control module A, one of the slave boards that measure cell voltages and temperatures inside the high-voltage pack, but rejects their content as invalid. Volkswagen names the code: its on-car analysis list of 31 July 2024 for the ID.4 (2021–2024) files U04A1 together with U04A5 and U04A9 under the topic CMCe faults, stored in diagnostic address 8C, with an electrical system warning and no other relevant code there; dealers have to call the VW helpline before repairing. Silence from module A would be U01A0, a software mismatch U033A. Data errors of the battery energy control module itself are a separate code, U0412. Reduced power or no charging is possible until it is fixed.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / A1

Possible causes

  • Software issue in battery management or cell module controllers (VW ID.4 CMCe case, helpline first) high
  • Interface control module A internally faulty medium
  • Loose or corroded connector on the pack-internal data link to module A medium
  • Weak 12 V battery disturbing the start-up of the battery electronics low

Symptoms

  • Electrical system or high-voltage battery warning in the cluster
  • Reduced drive power
  • Charging interrupted or refused

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U04A1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication