OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U049C

Invalid Data Received From Battery Charger Control Module A

U049C means the on-board charger, battery charger control module A, is heard on the bus but reports values the battery controller considers invalid. Ford's 2019 OBD summary for hybrid and plug-in vehicles has the BECM set it when the charger's CAN signal shows invalid states for 5 s; U019B is the same charger missing for 5 s. Ford calls this unit SOBDM or BCCM: it turns mains AC into high-voltage DC and also feeds the 12 V battery. Ford TSB 24-2445 (2023-2024 Mustang Mach-E) finds U049C in the BECM when DC fast charging fails with an error on the charger, and cures it by reprogramming the SOBDM. Charging is refused or stops while driving stays normal; Ford flags charger faults with the amber wrench lamp.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 9C

Possible causes

  • Charger module software reporting invalid states, cured by reprogramming high
  • Software levels of charger and battery controller not matching medium
  • Internal fault of the on-board charger low

Symptoms

  • High-voltage battery does not charge, error shown at the charging station
  • Charge fault message or wrench lamp in the cluster
  • Driving itself unaffected

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U049C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication