OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0485

Invalid Data Received From Radio

U0485 means the radio or centre stack still transmits but a receiving module rejects its frames. GM's 2025 tables (25OBDG03B, 25OBDG04B) describe the body control module checking alive rolling counters, protection values, checksums and CRCs of centre-stack signals, among them HVAC control requests: 8 failures in 10 samples, for some signals 14 in 18 or 15 in 16, set it at least 5 s after power-up, with the partial network active for 3 s, power mode Run and over 11 V; Type B. GM PIE0807A covers a MIL with U0485 and U1962 on the 2024 Traverse and Acadia 2.5 L. Stellantis lists it in 08-046-23, 08-014-24 and 08-101-25 (Grand Cherokee, Wagoneer, Pacifica), stored by the amplifier or with a MIL; radio software cures it. U0184 is lost contact.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 85

Possible causes

  • Radio or infotainment software level with known message errors, fixed by an update high
  • Radio resetting or waking late so that counters and checksums no longer match medium
  • Low supply voltage or a disturbed bus connection to the centre stack low

Symptoms

  • Radio resets, black screen or audio sources inoperative
  • Climate controls on the screen do not respond
  • MIL on some vehicles

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0485

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication