OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0484

Invalid Data Received From Lighting Control Module - Rear A

U0484 is set when frames from rear lighting control module A are received but carry values the listener cannot accept; U0183 stands for lost contact, while rear module B has U0252 and U0553. Such modules drive tail, stop and turn lamps or LED segments at the back and report their status. BMW's 2022 iX shows the layout: four rear light modules, two in the side panels and two in the tailgate, share Body_CAN, and a software error in them produced communication and time-out entries with rear light warnings although the lamps worked (SIB 63 06 22). GM updated the exterior lighting module of 2024 Corvettes that failed to tell the driver about a failed rear turn signal, an indication FMVSS 108 requires. No maker documents U0484 itself. Lamp warnings, possible default lighting; no MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 84

Possible causes

  • Software error in the rear lighting module or a module not updated to the current level high
  • Chafed or broken wires in the tailgate or boot lid harness medium
  • Water ingress at a rear lamp connector low

Symptoms

  • Rear light system warning although the lamps may still work
  • Turn, stop or tail lamp failures not reported or lamps in default mode

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0484

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication