OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0483

Invalid Data Received From Lighting Control Module - Front

U0483 means the front lighting control module, which switches low and high beam, daytime running and turn lamps or drives the LED channels in the headlamps, is still on the bus but delivers data the receiver rejects. U0182 would be the silent module, U0484 the rear counterpart. GM's Saab list names the front lighting control module among its partners. GM's 2024 Silverado and Sierra HD show how supply voltage upsets such a unit: with a weak battery its own voltage check fails, it resets every 8-10 s, the headlamps flash and P0606 is stored (24-NA-005), and replacing it is not the fix. Hella describes LED headlamp control units that report to the body control module over CAN and carry their own error monitoring. No manufacturer documents U0483 itself. Front lamps may revert to defaults; no MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 83

Possible causes

  • Weak battery or voltage dips during cranking upsetting the lighting module high
  • Lighting module software or calibration fault medium
  • Moisture or corrosion at the module or headlamp connector low

Symptoms

  • Headlamps or daytime running lamps flicker or flash
  • Exterior lighting warning in the cluster
  • Front lamps stay in a fixed default state

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0483

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication