U0482
Invalid Data Received From Headlamp Leveling Control Module A
U0482 is stored when messages from headlamp leveling control module A arrive but fail the receiver's integrity or plausibility checks; complete loss of contact is U0181, and U048B covers a second leveling unit. Such a module takes axle ride-height signals and moves the beam actuators so that a loaded boot or hard braking does not lift the cut-off line, as Hella explains; dynamic versions also react to acceleration. The module may publish values for others: Subaru bulletin 07-232-26 for the 2024 WRX with manual gearbox describes leveler modules whose computed vehicle inclination always read 0 degrees on the centre display, cured by a unit with revised logic. GM's Saab list names the partner U0181 without a letter. No manufacturer documents U0482 itself. Beam height may freeze; lighting warning, no MIL.
Possible causes
- Bent or faulty axle ride-height sensor feeding implausible values into the module medium
- Leveling module software computing or transmitting wrong values medium
- Basic setting of the leveling system not performed after repair or replacement low
Symptoms
- Headlamp leveling warning in the cluster
- Beam height no longer adapts to load and may dazzle or fall short
- Inclination display or related functions show fixed values
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0482
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.