OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0480

Invalid Data Received From Seat Belt Pretensioner Module B

U0480 mirrors U047F for seat belt pretensioner module B: the receiver gets its messages but finds them invalid, whereas U017F would mean silence. Honda's patent US 7,686,118 shows how such a unit is tied in: a dedicated electric belt controller drives the retractor motor, sits on the vehicle LAN, takes collision warnings from the brake control unit and receives the buckle signal routed through the airbag controller. With that many partners, bad data can come from the module itself or from inputs it relays. Autoliv's patent US 7,140,571 describes motor-driven reversible pre-crash tensioning. On 2025-2026 Audi models bulletin 2081251 records U017F00 beside U017E00. Comfort and pre-crash belt functions may switch off; no MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 80

Possible causes

  • Software fault in pretensioner module B or the unit sending it data high
  • Faulty input relayed through the module, such as the buckle signal medium
  • Internal fault in the motorised retractor low

Symptoms

  • Belt pre-tensioning or haptic belt warning unavailable
  • Restraint system warning message

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0480

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication