OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U047F

Invalid Data Received From Seat Belt Pretensioner Module A

U047F concerns seat belt pretensioner module A, a belt retractor with its own motor and electronics rather than a purely pyrotechnic tensioner fired by the airbag unit. Such reversible retractors take up slack before a possible crash, during emergency braking or evasive steering, and can warn by pulsing the strap, as ZF LIFETEC describes for its ACR8. A receiver stores U047F when this module's messages are corrupt or implausible; U017E is lost contact. On 2025-2026 Audi Q5, Q6 e-tron, A5 and A6 models, bulletin 2081251 shows the partner code together with U017F and a proactive occupant protection fault. FCA calls U017E seatbelt sensor 1 in bulletin 18-013-22. Pre-crash belt tensioning may be unavailable; no MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 7F

Possible causes

  • Software fault in the belt pretensioner module or its bus partner high
  • Supply or bus wiring fault at the retractor in the B-pillar or seat medium
  • Internal fault in the motorised retractor module low

Symptoms

  • Warning that proactive occupant protection is faulty
  • No belt pre-tensioning during hard braking
  • Airbag or restraint warning possible

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U047F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication