OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U047B

Invalid Data Received From Restraints System Sensor K

U047B: restraints sensor K is heard but its values are rejected; U017A covers lost contact. No manufacturer documents the letter K publicly, so its position stays open. Eleven satellites point to a large system, yet not every function needs one of its own: Bosch's AB premium controller can house rollover and inertial sensing internally and accepts as many as 18 PSI5 sensors. Where curtains also deploy in a rollover, FMVSS 226 requires a readiness indicator and lets NHTSA ask the carmaker to describe the deploying sensor system. Airbag lamp on, no MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 7B

Possible causes

  • Corroded or loose connector in the sensor line medium
  • Defective satellite sensor medium
  • Restraints controller software evaluating the sensor incorrectly low

Symptoms

  • Airbag warning lamp on
  • Code stored in the restraints controller

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U047B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication