U047A
Invalid Data Received From Restraints System Sensor J
U047A means the airbag controller receives restraints sensor J but its content fails validation; lost contact is U0179. Which component carries the letter J is not published anywhere. Pedestrian protection is one source of extra inputs: Bosch fits either acceleration sensors or an air-filled tube with a pressure sensor at each end into the front bumper, lets the airbag controller evaluate them and can raise the hood within 10 to 15 ms. Corrupt data from such a sensor would put that function in doubt as well. Airbag lamp on, no MIL.
Possible causes
- Bumper-mounted sensor damaged by a parking knock or bumper repair medium
- Line or connector fault on the sensor circuit medium
- Controller coding does not match the fitted sensors low
Symptoms
- Airbag or pedestrian protection warning shown
- Code stored in the restraints controller
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U047A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.