U0478
Invalid Data Received From Restraints System Sensor H
U0478 flags invalid data from restraints sensor H, the counterpart of lost-contact code U0177. No manufacturer publishes which sensor carries the letter H; the Chrysler fault tables filed with NHTSA under PE11-019 stop at G. An H implies at least eight satellites. Bosch's arithmetic allows that: besides acceleration satellites it wires two or four pressure sensors inside the door cavities, so four door sensors plus two side and two front acceleration sensors already add up to eight. Bosch's small AB light unit, with six sensor inputs at most, could not serve such a layout. Airbag lamp on, no MIL.
Possible causes
- Moisture or a damaged seal affecting a door-mounted pressure sensor medium
- Sensor line damaged, for example in a door hinge harness medium
- Restraints controller coded for a sensor set that is not fitted low
Symptoms
- Airbag warning lamp on
- Code present only in the restraints controller
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U0478
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.