OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0472

Invalid Data Received From Restraints System Sensor B

U0472 points to restraints sensor B: the airbag controller hears it but discards the transmitted values as corrupt or implausible, whereas U0171 would mean silence. Chrysler's NHTSA filing PE11-019 lists sensor B as the right-hand up-front satellite measuring acceleration on its 2007-2008 Jeep models, paired with internal fault B1B71. Front satellites of this kind sit in the crumple zone, where they notice a frontal crash earlier than the central unit. How much depends on their mounting is shown by Land Rover recall N685 for the 2022 Range Rover: front crash sensors fastened below the specified torque could work loose, feed the restraints system wrong information and even cause an unwanted frontal airbag deployment. Expect the airbag warning lamp; no MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 72

Possible causes

  • Front sensor not tightened to specification or loosened after body repair high
  • Chafed or corroded harness between front sensor and airbag controller medium
  • Measuring element of the right front satellite defective low

Symptoms

  • Airbag warning lamp on
  • Frontal crash detection possibly degraded until repair

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0472

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication