OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0471

Invalid Data Received From Restraints System Sensor A

U0471 is logged when the airbag controller still receives telegrams from restraints sensor A but rejects their content, for example because of a parity error, a reading outside the sensor's range or values that contradict the other crash sensors. Lost contact would be U0170. In Chrysler's diagnostic lists for the 2008 Jeep Wrangler, Compass, Patriot and Liberty, filed with NHTSA in investigation PE11-019, letter A stands for the left-hand up-front satellite, an acceleration sensor, with B1B70 for its internal fault. GM uses the letter differently: Saab's 2011 9-5 code list names U0170 as the passenger presence detection module, so on GM-based cars sensor A may belong to occupant sensing. Acura reports a silent left front sensor under its own code B0090. Expect the airbag lamp and weaker frontal crash sensing; no MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 71

Possible causes

  • Water or corrosion at the connector of a front satellite sensor in the engine bay high
  • Sensor or its bracket deformed by a minor frontal impact medium
  • Replacement sensor of the wrong part number or orientation fitted low

Symptoms

  • Airbag warning lamp stays on
  • Fault code stored in the restraints control module, sometimes with an internal sensor code

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0471

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication