OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U046D

Invalid Data Received From Fuel Pump Control Module B

U046D is about module B, the second of two fuel pump drivers, used on vehicles with two in-tank pumps or a saddle tank; for module A the matching code is U0410. A receiver, normally the engine controller, logs it when the module's reports, such as delivered pump output or its own fault status, arrive corrupt or implausible. No manufacturer documents U046D publicly. Ford shows that the same exchange can be judged without a U-code: in its 2024 OBD summary the pump B driver answers the engine controller over a duty-cycle feedback line, where 20 % (±4 %) flags an invalid command (P027B), 30 % an internal driver error (P26EA) and 0 or 100 % missing feedback, U016C, judged over 2-5 s with an 11-16 V supply. CARB requires fuel system components to be monitored. Expect the MIL, hesitation under load, hard starting or reduced power.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 6D

Possible causes

  • Poor ground or corroded connector at the second fuel pump driver high
  • Damaged feedback or bus wiring between pump module B and the engine controller medium
  • Worn pump B drawing excess current and upsetting the driver's reports medium
  • Internal fault in fuel pump control module B low

Symptoms

  • Check engine lamp on
  • Hesitation or power loss under heavy load
  • Long cranking or stalling

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U046D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication