OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U046B

Invalid Data Received From Global Positioning System Module

U046B indicates that position, speed or time data from the global positioning system module fail plausibility in a receiving unit: a corrupt frame, a counter that stalls, or coordinates that cannot match the movement the car measures through its wheel speeds. The receiver feeds navigation, telematics, emergency call and map-based assistance. At Ford the telematics control unit evidently plays this role: according to SSM 54351, Transit vans of model year 2026 that lack a TCU can store the lost-contact twin U016A in a secondary OBD module, with no repair needed. A similar note for U046B does not exist; no manufacturer documents U046B publicly. U0464 covers bad data from the navigation unit, U0198 lost contact with the telematics module. The map position drifts or freezes; driving is unaffected, no MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 6B

Possible causes

  • Damaged GPS antenna, cable or connector giving poor or jumping fixes high
  • Software fault in the GPS or telematics module medium
  • Low battery voltage or poor ground at the module medium
  • Internal fault in the GPS module low

Symptoms

  • Vehicle position on the map is wrong, jumps or freezes
  • Connected services or emergency call show no location
  • Clock or time zone set incorrectly

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U046B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication