U046A
Invalid Data Received From Sunroof Control Module
U046A is logged when a module, usually the body controller or the overhead console, gets data from the sunroof control module that fails its checks: position and motion reports that contradict each other, a counter that stops changing or a bad checksum. The sunroof module drives the glass panel and sun blind and tracks their end positions. US standard FMVSS 118 restricts when a power-operated roof panel may close and demands automatic reversal where it closes outside those conditions, so a receiver that cannot trust the module usually blocks convenience closing from the key fob or rain sensor. No manufacturer documents U046A publicly. U0169 means the module is silent, U0140 concerns the body control module. Besides connectors, water from blocked roof drains is a plausible cause. The roof may ignore its switch; no MIL.
Possible causes
- Water in the roof module or its connector from blocked sunroof drains high
- Lost end-position learning after battery disconnection or panel work medium
- Chafed wiring or loose connector in the headliner medium
- Internal fault in the sunroof control module low
Symptoms
- Sunroof does not open or close with its switch
- Convenience closing by key or rain sensor no longer works
- Panel stops midway or reverses unexpectedly
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U046A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.