OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0469

Invalid Data Received From Starter / Generator Control Module

U0469 means the engine controller or gateway receives data from the starter/generator control module but cannot trust it. On 48 V mild hybrids this electronics sits in the belt starter generator, which cranks the engine, recuperates and charges both networks. Audi documents the code for A6, A7, A8, Q7, Q8 and related 48 V models from 2018 on: bulletin 2058831 pairs it with P0CA700 in the 48 V battery and first cures it with generator software; later revisions read the stored generator mode and compare requested with delivered torque, which should agree within 5 Nm. Bulletin 2073284 adds that U0469 often follows other CAN faults (U0028/U0029), so a new generator does not help. Ford's 2014 code list carries U0469 without MIL. U0120 is lost contact. Typical signs: electrical system warning, battery symbol, no start-stop.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 69

Possible causes

  • Outdated software in the starter/generator control module high
  • Other CAN or sensor faults disturbing the hybrid bus, with the generator only reporting the effect high
  • 48 V battery or 12 V supply problem upsetting the generator electronics medium
  • Internal hardware fault in the belt starter generator low

Symptoms

  • Electrical system fault message and yellow or red battery symbol
  • Start-stop and recuperation no longer work
  • 12 V battery not charged while driving

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0469

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication