OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0468

Invalid Data Received From Fuel Cell Control Module

U0468 marks invalid data from the fuel cell control module, the master controller of a hydrogen car, managing air and hydrogen supply, heat and water in the stack and the split of electrical power between stack, buffer battery and drive. Partners such as the motor inverter, battery management or the hydrogen storage unit reject its frames when checksums, counters or power requests do not hold up. No manufacturer documents U0468 publicly. Hyundai's supplier Kefico ranks the unit highest among the controllers of a fuel cell vehicle, and Hyundai's Nexo campaign T5D (2019-2020) rewrote its MIL logic together with that of the hydrogen storage management unit, so a lamp is possible. U0119 is lost contact, U0293 the hybrid/EV powertrain controller. Expect a warning, battery-only limp running or no READY.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 68

Possible causes

  • Fuel cell control unit software needing an update from the manufacturer high
  • Weak 12 V battery or poor ground disturbing the controller medium
  • Connector or bus wiring fault between the fuel cell unit and its partners medium
  • Internal fault in the fuel cell control module low

Symptoms

  • Fuel cell system warning in the cluster
  • Reduced power, driving on the buffer battery only
  • Vehicle does not reach READY

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0468

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication