OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0466

Invalid Data Received From HVAC Control Module - Rear

U0466 concerns the rear HVAC control module, the second climate controller in vans, minivans and large SUVs that runs its own blower, blend flaps and often a separate control panel for the back rows. A receiver such as the front climate unit or the body controller sets the code when the rear module's frames carry bad checksums, stalled counters or settings it cannot accept. No manufacturer documents U0466 publicly. For the front unit GM describes the equivalent check in its 2025 body controller: counters, protection values and CRCs of the HVAC messages are tested every 10 ms, and 8 failures within 10 samples set U0424 as Type B. U0165 means the rear module is silent, U0424 covers bad data from the front unit. The rear zone then ignores its controls or holds a fixed setting, while engine and front climate stay normal; no MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 66

Possible causes

  • Loose or corroded connector at the rear HVAC module, often in the rear trim or headliner high
  • Software mismatch after replacing or programming one of the climate modules medium
  • Weak battery or voltage dips at the module medium
  • Internal fault in the rear HVAC control module low

Symptoms

  • Rear climate controls do not respond
  • Rear blower or temperature stuck at one setting
  • Climate warning or fault message in the display

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0466

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication