OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0465

Invalid Data Received From PTO Control Module

U0465 flags implausible data from the power take-off (PTO) controller. That unit switches in an engine-driven output for dump beds, aerial lifts or pumps and asks the engine for a working speed. The engine or body controller logs it when PTO state or speed requests arrive corrupted or contradictory. GM uses the code: Saab's U-code tables for the 2011 9-5 and 9-4X, which follow GM's global architecture, list U0465 00 for invalid data from the PTO module, without timing or lamp rules. CARB lets the engine controller suspend monitor counters while a PTO runs, so a trusted PTO status matters for OBD bookkeeping. Caution: a Ram 1500 STAR case (S1908000041) prints U0465 in its title, but its body names U0645, the active air dam. U0117 is lost contact, P064B a PTO module fault. PTO or set speed drops out; no MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 65

Possible causes

  • Damaged or corroded wiring and connectors of the body-mounted PTO module high
  • Mismatched configuration after installing or changing the body equipment medium
  • Voltage drops while the PTO and hydraulic loads are running medium
  • Internal fault in the PTO control module low

Symptoms

  • PTO cannot be engaged or disengages on its own
  • Working engine speed for the body equipment is not held
  • PTO warning or message in the cluster

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0465

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication