OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0464

Invalid Data Received From Navigation Control Module

U0464 is stored when a module still hears the navigation control module but rejects its content: a frame whose checksum fails, a message counter that no longer advances, or position, heading and route values outside their defined range. Typical listeners are the instrument cluster or head-up display, which repeat turn arrows, and on some cars predictive cruise or shift logic that reads the map ahead. No manufacturer documents U0464 in an openly accessible source. The protection behind such checks, a CRC and a sequence counter per message, is laid down in the AUTOSAR end-to-end protocol. U0163 means the unit has gone silent, U0463 concerns the separate navigation display and U046B the GPS receiver. The consequences stay in guidance and comfort: missing arrows or a wrong map position, no MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number4 / 64

Possible causes

  • Navigation unit software or map update fault sending implausible values high
  • Loose connector or damaged bus wiring at the navigation unit or head unit medium
  • Weak 12 V battery or voltage dips during start-up corrupting frames medium
  • Internal fault in the navigation control module low

Symptoms

  • Turn arrows missing in the cluster or head-up display
  • Vehicle position on the map jumps or is wrong
  • Route guidance stops or restarts unexpectedly

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0464

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication